21
Stage
Issues, symptoms
Additional info
Likely Cause
Solution
Peeling
Skin remains after peel
-
ing
Sometimes the
skin fails to be
peeled.
Is the skin already in contact
with the blade before start
-
ing?
If the arm and blade are
entangled, remove them.
Has it been some time since
you used the peeler? Has
juice hardened on (in) it?
Use a damp cloth to carefully
wipe clean the peeler blade.
Is the position of the item
correct?
Align the core to the holding
prong.
Peeling stops in mid-op
-
eration.
The peeler blade
seems to be catch
-
ing on something
When the peeling depth is
too deep, the blade will be
caught to the item and the
pin might spin out of control.
Change the blade to thinner
blade or decrease the peel
-
ing thickness, and slow the
spin speed.
The item might be too large. If will cause malfunction if
the item is too large.
An item separates from
the prong.
–
Are you attempting to peel
an extremely soft item or an
extremely deformed item?
Reducing the spin speed
may help, but there is a limit.
Have you attempted to affix
the item once again, or
peeled it more than once?
Inserting an item twice
increases prong damage
as well as increasing the
, and the chance the item
will weaken and slip off the
prong.
An item wobbles on the
prong.
--
Is the item affixed to the cen
-
ter?
Some wobble is OK, assum
-
ing that the item is peeled
correctly.
Skin scatters in small
pieces.
--
The skin of a kind of fruit that
has a hard skin scatters into
small pieces.
We prepare anti-skin cover
sold separately.
Summary of Contents for Peel-a-ton KA-720
Page 23: ...22 MEMO ...
