Astra Peel-a-ton KA-720 Operation Manual Download

Page: 7 / 24

2) Mechanical parts

(KA-750)

No.

Name

Function

Reference page

Peeler blade

(Replaceable part)

Each blade is designed for specifi c varieties of fruits/vegetables and sizes.

Large blade, mainly for pineapple, needs to be polished with the at-

tached stone, and maintain sharpness.

Smaller blade, mainly for mangoes, is one-way, which needs to be

changed to a new blade periodically.

Reference pages:

13, 14, 16, 17

Arm

This arm holds the peeling blade. Each arm is designed for specifi c va-

rieties of fruits/vegetables and sizes.

Reference pages:

7, 9, 13, 14, 16

Spring

(Replaceable part)

This spring pushes the blade to the fruits/vegetables.

Reference pages:

13, 14

Holding Prong

(Replaceable part)

Holding prong holds and fi xes the fruits/vegetables to the rotating axis.

Each is designed for specifi c varieties of fruits/vegetables and sizes.

Reference pages:

7, 12, 16

Ejector

After peeling the item, push it up manually to facilitate extraction from

the unit.

Reference pages:

9~11

Slider

Interlock the slider with the ejector, then push up the item to facilitate

extraction from the unit.

Reference pages:

10~12, 16

Laser liner

(Sold separately,

only for KA-750)

When fi xing the item to the holding prong, apply the laser beam as a

guide for centering the holding prong as seen from directly above. (Sold

separately)

Reference pages:

8, 10, 15, 16

* Each parts has its own shapes and combinations depending on the peeled item.

(5) and (6) are unnecessary when peeling mangos.

3) Back of unit

(KA-750)

No.

Name

Function

Reference page

Power switch

Powers the unit on or off.

Power inlet

Install the power cord provided with the unit. (For 720/730 power plug

can’t be separated.)

Fuse

AC125V / 5A, or AC250V / 5A (Time-lag fuse)

* (2) and (3) is different depending on the country / area.

Summary of Contents for Peel-a-ton KA-720

























Search results

Summary of Contents for Peel-a-ton KA-720

Reviews:

Related manuals for Peel-a-ton KA-720

Brands by name

Popular brands

Astra Peel-a-ton KA-720, Operation Manual

Search results

Summary of Contents for Peel-a-ton KA-720

Reviews:

Related manuals for Peel-a-ton KA-720

Brands by name

Popular brands