68
of
92
TECHNICIANS manual
10.7.4 Cleaning the shower screen and shower screen
containment ring
Clean the shower screen and shower screen contain-
ment ring on a weekly basis, following the steps indicated
below:
•
Loosen the screw using a screwdriver (
1
);
•
Remove the shower screen (
2
) and the shower screen
containment ring (
3
);
•
Carefully wash the two components with hot water;
•
Reposition the shower screen and shower screen
containment ring in their original position and lock
everything in place with the screw.
10.7.5 Cleaning the shower screen group and filter holder
Clean daily the shower screen group
and of the filter holder with the brush
provided.
Thoroughly clean the inside of the
coupling ring and of the filter holder; as
well as the edge and the wings of the filter
holder, so as to eliminate any accumula-
ted coffee residues.
Use the special toothbrush supplied (see spare parts catalog).
10.7.6 Cleaning the steam nozzle
Clean the steam nozzle on a weekly basis as follows:
•
Insert the steam wand into a jug with water and a
specific cleaner, in accordance with the manufac-
turer's instructions;
•
Heat the solution with the steam nozzle;
•
Let the nozzle cool down whilst keeping it immersed
in the solution for at least 5
minutes, so that cleaner can rise
inside the nozzle due to the cool-
ing effect;
•
Repeat the operation 2 or 3 times
until no more milk residue is
dispensed.
11.
SPARE PARTS
To replace machine components and/or parts, refer
to the official documentation provided by the Manu-
facturer.
All original spare parts are available from the Manufacturer’s
website. The Manufacturer can provide a list of spare parts
recommended for maintaining the various versions of the machine
on request.
If non-original parts are used, the safety of the machine cannot
be guaranteed.
The Manufacturer reserves the right to void the machine
guarantee.
Summary of Contents for 2GR
Page 91: ......
