67
of
92
TECHNICIANS manual
ENGLISH
10.7.3 Selected dispensing group washing
If desired, it is possible to wash the groups at any time,
proceeding as follows:
•
Select the button;
•
Press the menu key ;
•
Select the configuration button
;
•
Press the
washes
button;
•
The display will indicate the date of the last washing
and the number of washing cycles;
•
To start the wash, press the
perform a wash
button;
•
Insert a suitable detergent in the blind filter holder,
secure it to the dispensing group and press the
start
button;
•
Wait for wash cycle to finish, then remove the filter
holder from the dispensing group and press the
start
button;
•
When the rinse cycle has finished, remove the filter
holder from the dispensing group and press the
end
button.
During the washing stage, all the coffee selections of that group
are disabled.
If the wash is interrupted because the machine was switched off,
the washing will be reactivated automatically when the machine
restarts.
If it was programmed (P15 with value 2), it is possible to perform a
brief rinsing of the group (about 3 seconds) by pressing the manual
key or the START/STOP key of the display.
If a certain number of cycles has been programmed and such
number is exceeded, the message “Perform group washing now?”
appears on the display. Proceed with washing following the
instructions on the display.
USER MENU
programme doses
time and date
screensaver
washes
counters
parameters
blend selection
water filters
last dispensed
beverage
WASHES
WASHES
WASHES
WASHES
groups
perform a wash
start
start
end
date of last wash
insert blind filter
holder with
detergent
end of wash
Remove blind
filter holder.
wash completed
number of wash cycles
wash in progress
rinsing in progress
WASHES
WASHES
Summary of Contents for 2GR
Page 91: ......
