23
of
54
TECHNICIANS' manual
ENGLISH
Core200
1. Support base
2. Grinder-dispenser
3. 20 cm minimum distance between the machine
and the wall.
4. Drain tray
5. Water mains inlet
6. Adjustable feet of the machine
7. Electrical mains switch.
8. Water filter inlet
9. Water filter outlet.
10. Sewer drain.
11. Water mains tap
12. Water mains check valve.
13. Drawer for depositing used coffee grounds.
14. Support for knocking out the grounds in the filter
holder.
15. The minimum height of the machine top from the
floor must be 150 cm
.
5.5
Support base
To ensure a sufficient degree of ergonomics and ma-
chine safety, a support base with the following features
must be made available (reference drawings on the next
page):
•
Ensure that there is sufficient space for the machine
to be positioned and used correctly;
•
The worktop
(1)
must be practical and able to with-
stand the machine’s weight, and must be approx. 90
cm high
(15)
;
•
The base must be perfectly level and have no irregu-
larities;
•
The terminals for connecting to the water mains
(11)
and electrical mains
(7)
must be in the immediate
vicinity of the support base;
•
If the machine is positioned next to a wall, ensure that
there is a gap of at least 20 cm between the machine
and the wall
(3)
;
•
Fit a drawer under the worktop
(13)
which will be
used to deposit used coffee grounds and if possible,
fit a rubber support as well
(14)
to knock the filter
holder against.
n order to work properly and ensure safety, the machine must rest
on a perfectly horizontal surface.
Any machine alignment adjustments must be done by adjusting
the feet (7).
If the machine is installed in moving environments (trains, ships,
etc.), special anchor pins must be used on the support base, which
are available from the manufacturer.
1
4
5
2
6
7
8
9
12
10
11
14
13
15
3
Summary of Contents for 10003318
Page 53: ......
