20
of
54
TECHNICIANS' manual
Core200
3.
TRANSPORT AND HANDLING
3.1
Safety precautions
Carefully read the instructions provided in chapter I.
3.2
PPE features
When transporting the machine, the following PPE
is required:
The use of protective gloves is mandatory
The use of safety shoes is mandatory
3.3
Weight
MODEL
COMPATTA
2 GR
3 GR
Maximum gross
weight
-
77 kg
110 kg
3.4
Handling the packed machine
Upon arrival, the machine must be unloaded and
handled with care, carefully following the instructions
on the packaging, or those contained in this Manual.
It is very important to check that the maximum load capacity of
each piece of lifting equipment is at least equal to the weight of
the loads to be lifted, to which must be added the safety margins
which are required by current standards.
3.5
Unpacking the machine
•
Only remove the ma-
chine from its packa-
ging when it is ready
to be installed, in order
to prevent accidental
collisions which could
damage it:
•
Open the packaging, ta-
king care not to damage
the machine;
•
Remove and take out
the machine guards and
equipment inside the
packaging;
•
Remove the machine;
•
Dispose of the packaging in compliance with the
current waste regulations.
After unpacking the machine, check that there are no damaged
parts due to transport or missing parts. Should there be any,
immediately inform (no later than 7 days after delivery) the
CARRIER and MANUFACTURER, communicating the machine data
and providing photographic evidence:
We recommend that you keep the packaging until the guarantee
has expired.
Wood, nails, staples, cardboard: non-polluting material which
must be recycled properly.
Plastic: polluting material that must not be burned (danger of
toxic fumes), nor disposed of as normal waste; to be disposed of
according to current regulations.
Summary of Contents for 10003318
Page 53: ......
