4. Press the main “on/off” button to turn on the power.
5. Rotate the diverter valve to the body jet position.
6. Press the “shower” button on the control panel.
7. Water will begin to flow from the showerhead.
8. Set the thermostatic valve.
9. When finished, press the “shower” button on the control panel to turn off the
shower.
Shower wand
1. Rotate the diverter valve to the shower wand position. Water will begin to flow.
2. Set the thermostatic valve.
3. When finished, rotate the diverter valve back to the “off” position.
Filling the Whirlpool bath
1.Turn the diverter valve to the waterfall spout position.
2.Water will begin to flow out of the outlet fill spout.
3.Set the thermostatic valve.
4.When your bath is filled with the amount of water you want, rotate the diverter
valve back to the off position.
37
