5
1, set the vacuum time: Press” SET” shown below;
Parameter setting; ① vacuum time setting ②heating time setting ③cooling time
setting
Press” ENVERLOP “(sealing selection) button display as follows:
Vacuum time setting: the current setting is: 40S, press ADD (increase) to increase,
press DEC (decrease) to reduce, after modification, press ENVERLOP (sealing selection)
button to confirm save.
2, Heating time setting;
Press the SET, press ADD (increase) to add to the display as follows:
Parameter settings: ① vacuum time setting ②heating time setting ③Cooling time
setting: Press ENVERLOP (sealing selection) button is show below:
Heating time set, the current setting value; 10s, press ADD (increase) to increase, press
DBL (reduction) to reduce, modify the finished press ENVERLOP (hot key) button to
save.
3,Cooling time setting: Press SET, press ADD (increase) to add to the display as follows:
Parameter settings: ①vacuum time setting ②heating time setting ③cooling time
setting: Press ENVERLOP (sealing selection) button display as follows: cooling time
setting, the current setting value: 20s, press ADD (increase) to increase, press the DEL
(reduction) to reduce, after completing press ENVERLOP (sealing selection) button to
confirm save.
4, System language selection: Press SET , press ADD (increase) to add to the display as
follows:
Parameter settings: ①vacuum time setting ②heating time setting ③cooling time
setting ④system language selection : Press ENVERLOP (sealing selection) button show
below:
① Chinese, ②English. Press ADD (increase) to increase, press the DEL (reduction) to
Model
DZ-400/2E
Voltage
AC 220V/50Hz 110V/60Hz
Motor Power
900W
Sealing Power
500W
Ultimate Vacuum Pressure
1KPa
No. of Sealing Bars for Each Chamber
2pcs
Chamber Dimension(L
×
W
×
H)
420X435X70mm
Sealing Length
400mm
Sealing Width
10mm
Vacuum Pump Rate
20m
3
/h
Material for Vacuum Chamber
Stainless steel
External Dimension (L
×
W
×
H)
540x490x950mm
Net Weight
110kgs
Distance of Two Sealing Bars
340mm