16
on when machine connect voltage
B
Vacuum time Relays
Used to set the time vacuum, range from 0-60 seconds.
C
Sealing time relays
Setting the sealing time, range of 0-6 seconds.
D
Cooling time relays
Setting the Cooling time, range of 0-6 seconds.
E
Vacuum meter
Show the vacuum chamber vacuum degree
F
Sealing temperature adjust
Adjust sealing temperature.
G
Emergency switch
Press it machine stop work immediately
Computer board panel presentation
No.
Name
Description
A
Display panel
Display program running function status, decreasing the
digital display.
Display the selected machine parameter settings, a digital
display.
Standby Display "_"
Deflated display state "
□□
"
Program run is completed the display "Ed".
B
Emergency Stop
Press it machine stop work immediately, and turn to loose
air function, vacuum cover auto jump up
C
Temp. adjust
Press 1time-low temp. Press 2time-medium temp.press3
time-high temp. Press 4time- stop heat.
D
Up adjust
Press the button once to adjust the parameters of the
selected function program increased by one unit.
Press and hold the button, value will increase at a rate of
about 5 values per second.
E
Down adjust
Press once, the parameters of the selected function
program is reduced by one unit each.
Press and hold the button, value will decrease at a rate of
about 5 values per second.
F
Vacuum time adj. Press enter into vacuum time adjust, up and down buttons