23
If the machine is not operated properly or emit a lot of strange noises, turn off the
power immediately and contact the manufacturer or supplier.
Do not carry out a high-pressure cleaning. High pressure cleaning will severely
damage electronic devices and other parts.
Do not allow water to enter the vacuum pump exhaust nozzle or vent, otherwise
would cause irreparable damage to the vacuum pump.
Non-professionals cannot carry out a large-scale maintenance.
When moving or transporting, the machine must be in an upright state level.
Tilting machine may damage the vacuum pump.
Summer or daily work continuously for more than 10 hours, a vacuum pump
should be taken measures such as air-cooled or water-cooled.
If you do not follow the instruction manual to maintain machine, the manufacturer
assumes no responsibility once machine results in malfunction or damage.
1).standard maintenance of the Periodic Table
Cycle time
Maintain the content
Day
With a damp cloth to clean the
vacuum chamber, vacuum chamber
lid and chassis per day, it is possible to
remove the foreign matter adhered to
the heating plate. The cut material
using a high pressure cleaner.
Week
Check the vacuum pump oil level and
oil, such as oil is low or bad, the oil
should be refueled or changed.
Check the heating plate is damaged,
once the sealing quality deterioration
or linoleum / electric flat yarn no
longer stick to the hot plate, please
replace the high temp. tape / electric
heating wire
Check the pump cover ring, ring once
damaged or stretched, please change.
6 month
Check the pump filter is saturated, if
saturated, replace the filter.
At least once every six months to
change the vacuum pump oil.
Year
Replace every sealing balloons or
cylinders.
2). vacuum pump maintenance (hereinafter are XDZ-020 rotary vane vacuum pump, for
example)
pump routine maintenance to ensure proper operation and extend the service life
is very important.
If the machine is frequently used, it is recommended at least once a year to pump