© Associated Research 2017
9
Main Menu
3. Turn on the POWER switch located on the lower left hand side of the front panel. Upon powering the instrument up, a POWER
ON SELF TEST (POST) will automatically be performed. This test will check for the condition of the ram chips, PCB’s and other
critical components. The instrument screen will then default to the main menu.
The default screen is the main menu screen of the instrument. From this screen you can access all the functions and settings of
the instrument:
Getting to Know Your Instrument
Using the Touch Screen
The touch screen display of the HYAMP provides full control of the instrument. Use the he touch screen to setup system and test
parameters as well as security setup and calibration. HYAMP’s touch screen functions just like any other touch screen.
Soft Keys
The HYAMP touch screen has 3 functional keys: Back, Home and Perform Tests:
Use the
Home
key to return
to the Main Menu.
Use the
Perform Tests
key to navigate
to the Perform Tests screen.
Use the
Back
key to return
to a previous menu.
RETURN
CURRENT
RESET
TEST
HYAMP® Series
GROUND BOND TESTER
SENSE +
TEST
SENSE -
My Menu / Select
POWER
DATA
BARCODE
