© Associated Research 2017
62
Test Execution Commands
The following commands are used to control actual output voltage and current from the instrument. Please observe all safety
precautions.
TEST
Starts the test sequence at the selected step loaded into memory (RAM).
RESET
Stop or abort a test. Also used to reset a latched failure condition.
SAO
Set the offset for the Ground Bond test. The cables and any test fixture should be connected before executing the command.
This command will perform an actual test and all safety precautions should be observed when using this command.
SAOV
Set the Voltage offset for the Ground Bond test. The cables and any test fixture should be connected before executing the com-
mand. This command will perform an actual test and all safety precautions should be observed when using this command.
File Editing Commands
The following commands are used to create or modify Test Setup Files.
• Commands should be separated from parameters by a space.
• If multiple parameters are entered, they should be separated by commas.
COMMAND
DESCRIPTION
TEST
Execute a Test
RESET
Abort a test in Process or Reset Failures
SAO
Set Auto-Offset
SAOV
Set Auto-Offset Volt
