(BESA-12V24G) User Manual
Version GS 17628
8
Version GS 17628
New: Key-in Particulars:
Select:
The Analyser will always begin in this mode. Once entered, the display will show (Fig.14) as below:
To key-in the particulars (e.g. VIN, vehicle registration numbers/ battery model/ testing date/ customer’s
name/reference numbers/ etc. which can only be entered with a single choice having not more than 17
characters ), press
key to scroll up the alphabet A,B,C ~Z and numbers1,2,3~0 while
key to scroll
down from Z,Y,X~A or 0,9,8~1 to select. Press
key will move one space to the right while
key will
move one space backwards for editing purposes. Then press key to confirm.
Note: If you do not input any particulars and straight away press key to continue, then the test
results will not save in its memory.
To Continue or Repeat Test:
Select:
Selecting this function allows user to continue or repeat the last test and no need to key-in (type) the
particulars again on the same car from where the last test was conducted and it will update the results.
For example:
If you had done Battery Test and later wish to perform Alternator Test or Grounding Test on the same car,
just select this function and it will update the results after each test in its memory and it can be retrieved
for review later or to be printed out.
View Test Results from the memory:
Select:
This lets the user view all the test results stored in its memory. Once entered, the display will show
(Fig.15) as below showing all the particulars that was key-in (type) during the test. Press
key to scroll
upwards and
key to scroll downwards to select. During scrolling the bar highlight will move up or down
on the required particulars.
Fig.14
367061WS2337E
SZC3466MZ
MR. KINGSLEY
CAL2115EM
