(BESA-12V24G) User Manual
Version GS 17628
26
Version GS 17628
Press key to continue and the display will show: (Fig.66 & 67)
Now transfer the BLACK tester clip from the battery [-] terminal to a suitable position on the engine or
chassis body leaving the RED clip still attached to the battery [+] terminal as shown above.
3. As soon as the BLACK tester clip is attached to the engine body, the display will show: (Fig.68) which
means that you need to press key to continue.
8. When key is pressed, it will start analysing and the display will changed to the screen (Fig.69)
below:
9. Once it has finished analysing, it will prompt you with instructions (Fig. 70 & 71) stating that you have
should unclamp the Black tester clip from the engine or chassis body and transfer to the battery
negative [-] terminal within 15 seconds time limit if not the testing procedure has to be repeated
again as the gathered data will be lost.
10. Once the Black clip is clamped onto the battery [-] terminal, the Analyser display will light up as
shown. (Fig. 72)
Fig.66
Fig.67
Flashing
alternately
Fig.68
Fig.69
Fig.70
Fig.71
Flashing
alternately
Fig.72
