(BESA-12V24G) User Manual
Version GS 17628
28
Version GS 17628
View Test Results from memory:
To view the all the test results, the Analyser have to be connected to an external power source by either clamping
its clips directly to a 12Volt car battery or connected to a PC via the USB port using an USB cable.
1. Once power up, the wakeup screen will display as follows: (Fig.77 & 78)
2. Select
View Test Report from memory
by scrolling with
key to . See display below (Fig.79):
3. Once key is pressed, the display will show as follows (Fig. 80):
Select the particulars that you had keyed in earlier from the list by scrolling the highlighted bar up or
down when pressing
or
key. If the particular is not in the list that you are looking at, you may go to
the next page by pressing
or
key. Once you had found it then press key to confirm. The display
will show the results stored from its memory as example shown below:
USB cable
Fig.77
Fig.78
Fig.79
Fig.80
367061WS2337E
SZC3466MZ
MR. KINGSLEY
CAL2115EM
View Test Report
