(BESA-12V24G) User Manual
Version GS 17628
14
Version GS 17628
Once the battery type [SLI (WET)] or [AGM] has been selected, it will proceed to the display as shown
below (Fig.33):
20.
Press key and the display will show as in (Fig.34). To enter the value, press
or
key will increase
or decrease the original value shown on the display by 100 units.
Likewise use
or
key to increase or decrease the last two digits step of 5 units for each pressing.
21. Once the Amps rating of the battery is confirmed, press key will start the testing process. Refer to
the display below (Fig.35):
22. For less than 8 seconds, the results of the testing will be displayed on the LCD screen (Fig.36)
23. To print out the results, just press key on the Analyser, the printer will start printing.
Fig.33
Fig.35
Fig.34
Battery Result
Fig.36
180
CCA
12.55 V
[180 CCA]
120 CCA
18.91 m
Ω
70 %
State of Charge (SOC)
Rated CCA
Measured CCA (Power Available)
Internal Resistance
Life [Health]
