(BESA-12V24G) User Manual
Version GS 17628
13
Version GS 17628
16. To print out the results, just press key on the Analyser, the printer will start printing.
Motorcycle Battery Test:
To test motorcycle batteries, it is better to test with the battery taken out from the motorcycle for better results.
This is mainly due to the obstruction of the wires that were attached to the battery terminals and the tester clamps
may not clip properly due to lack of space at its terminals thereby may cause false test results.
17. While on the main menu as shown (Fig.30) below, select for Motorcycle Battery test.
18. Press key, the screen will show as (Fig.31) below:
19. For Motorcycle Batteries before selecting whether [WET (SLI)] or [AGM] and the ratings ‘CCA, SAE, EN,
IEC, DIN, CA and JIS #’ from the menu, check the battery model. This can be checked on the battery
labels as some of the examples shown below:
With the battery model in hand, refer to the Battery rating chart ( as seen in this example Fig.32 below)
provided in separate copies with the Tester when purchased, to get values to be keyed in.
Fig.30
Fig.31
Fig.32
