8-3
SORGENTE/SMILE/ISI-T/UNDERCOUNTER - Installation, Use and Maintenance - cod. A-MAN03 - Rev. 02/2012
8.2.2
Replacement of the rechargeable bottle
To ensure a greater autonomy of sparking water dispensing,
it is possible to replace the monouse CO
2
inside the di-
spenser, with a rechargeable external bottle that has a
significantly greater capacity
(fig.8.2)
.
It is not possible to supply data on the bottles autonomy
since this depends on the use, characteristics and tem-
perature of sparkling water.
Set up of the external rechargeable monouse CO
2
bottle
will be carried out in accordance with these steps:
• Remove the CO
2
pipe from the pressure reducer
and insert it in the appropriate coupling already
provided inside the dispenser.
• Screw the adapter (optional) for the external
CO2 bottle to the supplied pressure reducer and
tighten it firmly
(fig.8.3)
.
• Insert the new CO
2
pipe of appropriate length in the
pressure reducer housing and in the coupling for the
external bottle located on the back side of the di-
spenser
(fig.8.4)
.
• Screw the knurled ring nut of the adapter assembled on
the pressure reducer to the threading of the external
CO2 bottle tap and tighten it manually.
• open the bottle valve and check for leaks with soapy
water.
fig 8.2
fig 8.3
fig 8.4
