7-3
SORGENTE/SMILE/ISI-T/UNDERCOUNTER - Installation, Use and Maintenance - cod. A-MAN03 - Rev. 02/2012
7.2 Solutions to problems
The following table shows some operating pro-
blems of the dispenser that can be solved directly
by the user without involving the Service Centers.
PROBlEM
CAUsE
sOlUTION
The dispenser doesn’t
dispense water
Closed water tap
Open the tap
Connection pipe to the
tap pressed;
or with throttling
Choose a path for the
pipe which prevents pressing
and throttlings
Lack of
power supply
Check the correct connection
between the power connec-
tion cable and/or the correct
operation of the electrical
system
The dispenser
dispenses little water
Obstructed filter
Replace the filter
Low inlet water pressure Contact the technical assi-
stance service
The dispenser cools
less
Insufficient or prevented
ventilation.
Check the correct position
of the dispenser.
See paragraph Installation
Positioning. If the problem
persists, contact the technical
assistance service.
Water leakage
Filter installed in
a wrong way
Disconnect the power supply
plug, close the tap and
follow the instructions in the
Maintenance paragraph, filter
replacement
Internal damage
Disconnect the power supply
plug, close the tap, contact
the technical assistance
service
The dispenser doesn’t
dispense sparkling
water when the key is
pressed
Lack of CO
2
Replace or verify to have
opened the CO
2
bottle. See
also the instructions in the
paragraph Maintenance, Set
up or replacement of the CO
2
bottle.
