Operation manual
Ergometer CRG 200 v.5xx
IU-AT-77-C_I_ENG
ASPEL S.A.
19.05.2020
Strona 8 z 31
1.2. Working, transportation and storage conditions
Ergometer CRG 200 is intended for operation in the following conditions:
o
ambient temperature + 10°C ÷ + 40°C
o
relative humidity 25% ÷ 95% (non condensation)
o
atmospheric pressure 70 kPa ÷ 106 kPa
Ergometer CRG 200 should be stored and transported in the following conditions:
o
ambient temperature -20°C ÷ +60°C
o
relative humidity 10% ÷ 95% (non condensation)
o
atmospheric pressure 70 kPa ÷ 106 kPa
Air should not be contaminated with corrosion-inducing components.
If the Ergometer has been stored or transported at temperatures exceeding the
operating conditions, then after unpacking, leave it for a period of time necessary
for the device to adapt to the conditions and temperature of the room in which it
will be used.
Before moving the device, make sure it is switched off and disconnected from the
power supply and control computer.
In order to move the device, take the handlebars with both hands and bend the
device to a position in which it can be moved with the use of wheels.
Ergometer should be gently moved back to normal position; otherwise it may be
damaged.
If there is a need to move Ergometer to another building, always use its
original packaging or a wooden pallet.
PC computer and LCD monitor storage, transport and operation conditions are
specified in documentation of the foregoing devices.