Operation manual
Ergometer CRG 200 v.5xx
IU-AT-77-C_I_ENG
ASPEL S.A.
19.05.2020
Strona 17 z 31
3. Operation of Ergometer
Aspel S.A. offers training course on Ergometer CRG 200 operation.
3.1. Start-up of the device
Before first start-up after few days of using it is necessary to check mounting of
all connections.
Ergometer should be positioned on an even, stable ground and properly leveled (with
feet regulating knobs).
Before a training session height of the seat and position of handlebars should be
adjusted in the way of letting a person performing exercises feel comfortable. Power
supply should be connected to Ergometer's DC socket and power supply network.
Moving the seat's pillar post beyond marked regulation range is forbidden.
Electrical system of a room, where cyclometer is to be installed should fulfill IEC
requirements for electrical system safety.
Connect data cable to the Ergometer and to PC’s USB / RS-232 port.
Installation and start-up should be performed according to this description
(location of devices acc to fig. 4) and PC computer user manual (supplied with
computer set).
Only a PC computer with CE Declaration of Conformity (compliant with EN 60950)
can be connected to the USB / RS232 socket (by data cable).
Use the patient’s cable and the data cable supplied by the manufacturer.
Connect patient’s cable to ECG socket placed on Ergometer’s control board.