NMG2
®
Stop-Time Measuring System
Version 3.0.0
www.asm-sensor.com
5
Pos : 10 /Sic herheits hinweis e/Allg_Sic her heit shi nweis e U E @ 0\ mod_1385398033298_78. doc x @ 2610 @ 2 @ 1
1.2 General safety instructions
Pos : 11 /Sic herheits hinweis e/Sic herheits hinweis e_NM G2 @ 7\ mod_1543930800167_78.doc x @ 60275 @ @ 1
Risk of injury by the machine to be measured
•
Use the stop-time measuring system only in such a way that in the case of
malfunction or failure no person can be injured and no machine can be damaged.
•
Do not override the safety devices of the machine.
Danger of electric shock when touching the instrument due to faulty
connection
•
Guarantee that the earthing contact of the line socket is on earth potential.
•
Do not attach the stop cable under voltage.
Pos : 12 /Sic herheits hinweis e/Bes timmungsgemäß e Ver wendung/ Besti mmungsgemäße Ver wendung UE @ 1\ mod_1400142179648_78.doc x @ 9192 @ 2 @ 1
1.3 Intended use
Pos : 13 /Bedienungs anl eitungen/NM G2/Besti mmungsgemäß e Ver wendung _NMG 2 @ 6 \ mod_1510926556222_78. doc x @ 49607 @ @ 1
The Stop-Time Measuring System NMG2 is intended to measure stop time, stop distance and velocity of
power driven machinery like presses, robots and other machines with user access. For determining
measuring ranges, environmental compatibility and connection data of the sensor, please note the data
sheet. Use the unit as intended by operating within its specified technical data and ambient conditions.
The installation and operating instructions supplied with the unit must be observed. All maintenance and
service work must be carried out. The data sheet of the Stop-Time Measuring System is part of this
instruction manual. If yet not available, please request it.
The Position Sensor posi
wire
®
must not be improperly mounted, operated or serviced. In addition, operation
of the sensor in faulty condition is prohibited.
Pos : 14 / ########### Sei tenumbruch ################################### @ 0\ mod_1353584168894_0.doc x @ 336 @ @ 1
