NMG2
®
Stop-Time Measuring System
Version 3.0.0
www.asm-sensor.com
25
Magnetic clamp
Linkage for alignment of the actuator
Actuator plate
Actuator NMG2-AKTOR
Pos : 50 /Bedienungs anl eitungen/NM G2/O pti on Aktor @ 6\ mod_1511261686736_78. doc x @ 49800 @ 2 @ 1
4.8 Actuator Option
Description
The Actuator option will be used to release no-touch safety equipment (light curtains, light barriers and so
on). In the actuator mode, the actuator plate will be extended 10 mm into the active area of the safety
equipment if the machine passes the start position. This will cause the stop of the machine. The
measurement will be started. After standstill of the machine the measurement values will be printed.
Assembly and adjustment
Switch [7] pressed: "AKTOR" active; switch [2] released: "ÖFFNER" active;
Fasten the actuator NMG2-AKTOR to the linkage of the magnetic clamp and connect it to the AKTOR socket
using the WS-KABEL-5M-NMG. Attach the magnetic clamp to a ferromagnetic machine part in such a way
that the actuator plate can move into the protection area. Use the linkage to align the actuator plate so that
the protective device just does not trigger. For testing you can press the switch [2] and extend the actuator
plate.
Test Run
The execution of the measurement takes place as shown in previous chapter (see page 18). When passing
the starting point, the actuator will be released and the machine is forced to standstill. The result of the
measurement is displayed and printed out if necessary.
Pos : 51 /Bedienungs anl eitungen/NM G2/RS- 232-Sc hnitts tell e @ 7\ mod_1543933457539_78. doc x @ 60286 @ 2 @ 1
4.9 Interface RS-232- / PC connection via USB/RS232
Description
This interface can be used to transmit the measurement data to the PC. The data can be received on a PC
using a ASM-
Software „NMG2-USB/RS232-PROSOFT“ and then stored, evaluated and presented in
diagrams. In addition, a PDF printout of the measurement diagrams can be generated.
Pos : 52 / ########### Sei tenumbruch ################################### @ 0\ mod_1353584168894_0.doc x @ 336 @ @ 1
