NMG2
®
Stop-Time Measuring System
Version 3.0.0
www.asm-sensor.com
27
Pos : 54 /Bedienungs anl eitungen/NM G2/Fehl ermeldungen @ 6 \ mod_1510927758018_78. doc x @ 49640 @ 2 @ 1
4.11 Error numbers
If an operation or device error occurs the NMG2 will show an error number in the lower display [18].
The error number can be deleted by pressing the button
ADJUST/TEST RUN
[1] or switching off the device.
Meaning of the error numbers
Error number
Description
11
Line interruption:
The NMG2 has detected a line interruption.
12
Printer error:
The built-in printer doesn
’t respond.
51
Measurement aborted:
After the start of the measurement the measurement has been aborted by the
user.
52
Measuring time too long:
No standstill within the max. measurable stop time (5 s).
53
Measurement velocity:
The permissible measurement velocity was exceeded.
54
Measurement acceleration:
The permissible measurement acceleration was exceeded.
91
RAM error:
A defective memory cell has been found.
92
Relay feedback:
The relay is not in the defined switching state.
Relay is defective.
93
Relay time:
The max. permissible relay switching time was exceeded.
Relay is defective.
94
Actuator not connected (actuator button pushed)
Actuator is defective.
95
Actuator slow
Switching is time too long.
Pos : 55 / ########### Sei tenumbruch ################################### @ 0\ mod_1353584168894_0.doc x @ 336 @ @ 1
