15
Switching the alarm o
ff
When the preset time expires a beep is heard which you
can either turn o
ff
by touching any sensor or leave it to
turn o
ff
automatically after 2 minutes.
If you want to switch the timer o
ff
prior expiry of preset
time:
• Touch the timer ON/OFF sensor (G).
• By touching the sensor »
-
» (E) set cooking time to
»00«. Alarm function is o
ff
.
• Simultaneously touch both »+» and »
-
« (G and E)
sensors and switch the timer o
ff
.
• During the time the alarm is activated, timer can not
be preset for any hotplate (to enable timer setting
function, alarm must be switched o
ff
).
Safety functions and error display
The hob is equipped with the overheat safety sensors.
When they are activated they turn o
ff
the hotplates
nearest to the control board.
Error, possible cause, remedy
• Constant sound signal or Err 33
–
-
Water is spilled over sensor surface (Wipe the
sensor surface)
• Flashing
»H«
– Hot pan is placed above the sensor surface (Wait
until normal sensor temperature is regained.).
– Gaskets on heating elements are damaged. (Wait
until normal sensor temperature is regained.).
NOTE!
In case any other error signal is displayed, switch
the hob o
ff
immediately, disconnect it from the
mains and contact your nearest service center.