13
Automatic fast heating is not appropriate for...
• frying, roasting or simmering food which needs to be
frequently turned around, stirred, or added water;
• dumplings or pastry with lots of liquid;
• food for long stewing in steam
-
pressure pot.
Activation of automatic fast heating
• Selected hotplate must be set to level “0”.
• Touch the sensor “E” and the display switches to the
power setting 9.
• Press the sensor “+” (C) of the relevant hotplate and
the display indicates letter “A”.
• Select desired power level.
Power indicator intermittently displays the “A” symbol and
the selected power setting. When the fast heating period
expires, hotplate switches to the preselected power setting,
displayed constantly on the indicator.
Hint
• If the power selection knob remains at level 0 three
seconds after the automatic fast heating is activated,
that is if you fail to select the power setting for regular
cooking, the fast heating function is switched o
ff
.
• If you remove the dish from the hotplate and then
within the next ten minutes return it on the hotplate,
the fast heating function will resume operating fully to
the end.
Power setting
Duration of automatic fast
heating (in minutes
)
1
0,8
2
2,4
3
3,8
4
5,2
5
6,8
6
2,0
7
2,8
8
3,6
9
0,2
NOTE!
If you activated the automatic fast heating function
and also switched on extra powerful heating, the
latter will prevail over the automatic setting.
Safety switch o
ff
Power setting
Hours lapse prior safety
switch off
1
6
2
6
3
5
4
5
5
4
6
1,5
7
1,5
8
1,5
9
1,5
P
10 minut P, nato 80 minut na
stopnji 9
Maximum continuous operation of a particular hotplate
is limited, and the duration is displayed in the above
chart. When the hotplate is switched o
ff
by the safety
mechanism, the indicator displays symbols “0”, or “H”
in case there is any remaining heat left.In such cases
switch the hotplate o
ff
by touching the relevant power
setting sensor (C).
Example:
Set the hotplate to power level 6 and leave it operate for
some time. If you do not change the above setting, the
safety mechanism will switch the hotplate o
ff
after one
hour and a half.
Protection from overheating
Induction hotplate is also
fi
tted with safety device
against overheating which protects electronic parts from
damages. This device operates on several levels. When
temperature of the hotplate excessively rises, it switches
on two
-
stage fan. If this is not enough, extra powerful
heating is deactivated, and
fi
nally the safety device
either reduces the heating power of certain hotplates or
turns them o
ff
completely. When the hotplate cools o
ff
,
the full power of hotplate is again available.
