11
• After turning the ceramic glass hob on all displays
come on for a moment. The hob is ready for
operation.
• The hob is
fi
tted with electronic sensors which are
switched on if you touch the relevant circle for at least
one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible
error signalization). Always keep the sensor surface
clean.
Activating the hob
Touch the ON/OFF sensor (A) for at least one second.
The hob is now active, and all hotplate power indicators
(B) indicate »0«, decimal dot (B1) is
fl
ashing.
NOTE!
Now you need to select the next setting within 10
seconds, otherwise the hob switches o
ff
again.
Turning hotplates on
After turning the hob on using the ON/OFF sensor (A),
within the next ten seconds start one of the hotplates.
• Touching the desired hotplate sensor (C), its relevant
power indicator indicates »0« and decimal dot (B1) is
on.
• By touching sensors »+» (C) or »
-
« (E) set the desired
cooking power from 1 to 9.
NOTE!
Continuous pressing of »+» (C) or »-« (E) ssensor
the power level is automatically increased or
reduced. Another procedure is to change power
in steps is by intermediate touching of relevant
sensors.
Setting is always possible for one hotplate only
at the time - the one with the decimal dot on (B1).
Power display indicates »0«, or „H“, depending
on the existing temperature of the hotplate (see
Section Remaining Heat Indicator).
NOTE!
You can also turn the hotplate o
ff
prior the end
of cooking and use the remaining heat, and save
energy.
Turning hotplates o
ff
• Selected hotplate must be activated, decimal dot (B1)
is on.
• Touching the hotplate sensor »
-
» (E) set the power
level to »0«. After 3 seconds the hotplate is turned o
ff
.
Fast deactivation
• Selected hotplate must be activated, decimal dot (B1)
is on.
• Press both (+) and (
-
) (C and E) sensors
simultaneously, and the hotplate is immediately
switched o
ff
.
OPERATING THE COOKING ZONES