42
Blue back
Enable to select the screen background of the
projector when there is no signal detected.
Press
to switch on/off.
On ........To enable the blue background for
projection.
Off ........To disable the blue background.
Setting menu
Exit
Move
Next
Next
- - - -
Setting
Blue black On Off
IRIS
On Off
Rear On Off
Terminal
Input Output
On start On Off
Standby mode Normal Eco
High land On Off
Cooling fast Normal 60s
3D mode On Off
Ceiling On Auto Off
Test pattern
Exit
Move
Next
Next
- - - -
Setting
Third party lens support On Off
SHUTTER
On Off
Rear
When the function is set to On, the picture is
left/right reversed.
Enable to project the image
to a rear projection screen.
On start
Enable the projector to be turned on
automatically just by connecting the AC power
cord to an outlet when this function is set to
On.
Standby mode
This function is available when operating the projector via network.
Normal ...... Supply the power to the network function even after turning off the projector. You can
turn on/ off the projector via network or modify network environment while the projector
is turned off.
Eco ........... In this state, network function,RGB OUT is disable after turning off the projetcor.
No command but POWER ON is enable for RS232 after turning off the projetcor .
High land
Enable to control the fan through the Setup menu.
You can select the running speed of the fan according to the altitude of the location where the
projector is installed.
Off......Normal speed. Set it so if the projector is operated at a lower altitude.
On......Faster than Off. Set it so if the projector is operated at a higher altitude (above 3000 meters)
because fans will produce weaker effects.
Iris
This function is used to increase the contrast of
the image.
On.... Enable Iris function, increase the contrast
of the image.
Off.... Disable Iris function.
Setting
Setting
The projector has Setup menu that allows you to set the other various function described as
follows.
1 Press MENU button to display the screen
menu. Press
button to select Setting
icon and then press
or OK button.
2 Press
to select the desired item to be
adjusted, and then press
to switch the
items.
Terminal
The RGB 2 IN/RGB OUT terminal can be used
as computer input or monitor output.Press
to select input or output.
Input ............VGA 2 input
Output..........Monitor out