36
Computer input
Note:
• The projector does not support images
with resolution higher than 1920*1200. If the
resolution of your PC screen is so, please
reset to lower before connecting to the
projector.
• Image data other than XGA (1024 x 768) will
be modified to those applicable to the screen
size in the initial mode.
• If no signal is detected in the PC system
menu, options of True, Full, and Digital
zoom + are not available.
Digital zoom +
After you select the digital zoom +, the on-screen
menu will disappear, while the information on digital
zoom + appears. You can press Select to zoom in the
image size, and press ▲▼◄►to move the image
horizontally and vertically.
The moving is effective only when the image is larger
than the size of the screen.
You can also press D.zoom +or select on the remote
control to zoom in the projected image.
Digital zoom -
After you select the digital zoom -, the on-screen
menu will disappear, while the information on digital
zoom - appears. You can press Select to zoom out the
imag size. You can also press D.zoom - or select on
the remote control to zoom out the projected image.
To exit the “digital zoom +/-“mode, press any button
except the D.ZOOM+/- and the OK button. To return
to Normal size, select “ Screen” in the menu to adjust
screen size, or enter a new input source in the menu
“Input”. Or use keys▲▼ for digital zoom to adjust the
screen size.
Advanced
This function is used to set the horizontal/
vertical position and quantities of the projector
in image segment and mosaics.
Press
at "Advanced" to enter the advance
menu. press
button to select the item and
press
button to set the value.
H total: set the total quantities of the projector
at horizontal direction. Image will be
segmented by vertical direction. setting
value from 1 to 512.(WXGA mode:
1-640)
V total: set the total quantities of the projector
at vertical direction. Image will be
segmented by horizontal direction.
setting value from 1 to 384.(WXGA
mode: 1-400)
Position H: set the horizontal position of the
projector. Setting range: from 1 to the
total quantitiy of projectors at horizontal
direction.
Position V: set the vertical position of the
projector. Setting range: from 1 to the
total quantitiy of projectors at vertical
direction.
Note:
Resolution decides the H total and V total.
When resolution is 1024x768, H total from
1-512, V total from 1-384;
When resolution is 1280x800, H total from
1-640, V total from 1-400.
• Advanced item in screen menu for only VGA
1 input is enable.