31
Computer input
Auto PC adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and
Vertical to conform to your computer.
PC adjust menu
Menu operation
Auto PC adjustment
1 Press MENU button on side control or remote
control to display the on screen menu.Press
button to select the input source icon and
press
or OK button.
2 Press
button to select Auto PC adj., and
then press OK button.
To store the adjusted parameters
The system parameters adjusted in the Auto PC
Adjustment can be stored in the projector.
Exit
Move
Next
Next
- - - -
PC adj.
Auto PC adj.
Fine sync 16
Total dots 1344
Horizontal 296
Vertical 35
Clamp 1
Display area H 1024
Display area V 768
Reset
Mode free
Stored
√ Note:
● Total dots and horizontal & vertical position of some computers cannot be fully adjusted with this
Auto PC Adjustment function. When the image is not provided properly with this function, manual
adjustments are required.
● The Auto PC Adjustment cannot be operated when 480i, 576i, 480p, 576p, 720p, 1035i, or 1080i is
selected in the PC System Menu.
