Using TroubleShooter and ADLS Diagnostic Software
4-7
If the test fails repeatedly, make a note of the error message, quit the
TroubleShooter diagnostics, and call Technical Support.
Quitting TroubleShooter and restarting
network services
To quit TroubleShooter, click the
QUIT
button in the TroubleShooter
dialog box or quit from the menu bar.
To restart network services, perform the following steps:
1
Activate AppleTalk in the Chooser.
2
Select EtherTalk in the Network control panel.
3
Restart the Macintosh.
4
Select the Chooser from the Apple menu, then select a
network resource such as AppleShare or another net-
work service.
Running ADLS
The Asanté Driver Local Statistic (ADLS) program provides configura-
tion information about your Macintosh and MacCon adapter, and dis-
plays statistics about Ethernet traffic through the MacCon adapter.
Make sure you have EtherTalk enabled before running the ADLS pro-
gram. To enable EtherTalk:
1
Select Control Panels from the Apple menu.
2
Double-click the Network icon.
3
Select the EtherTalk icon.
4
Close the Network control panel.
5
Restart the Macintosh.
