Arturia CZ V User Manual Download Page 84

Page: 84 / 98

7.7. Bitcrusher

This bit-reducing effect offers several ways to deconstruct the sound. As the number of bits

used to express the sound is reduced, details will gradually disappear.

Downsampling is another form of audio entropy that can provide just the right measure

of de-evolution to your sound. As the sample rate is reduced, aliasing is introduced in the

higher harmonics, which can produce sub-harmonics as well. For a truly lo-fi experience,

the sample rate can be reduced to as low as 1/80th of the original.

Control

Description

Bit Depth

Reduces the number of bits used to render gradations in amplitude. Range: 1.50 to 16.0 bits.

Downsample

Lowers the sample rate used to represent harmonic content. Range: 1.00x to 80.0x.

Dry/Wet

Controls the balance between the input signal and the effected signal.

Arturia - User Manual CZ V - FX (Effects)

Summary of Contents for CZ V



































































































Search results

Summary of Contents for CZ V

Reviews:

Related manuals for CZ V

Brands by name

Popular brands

Arturia CZ V, User Manual

Search results

Summary of Contents for CZ V

Reviews:

Related manuals for CZ V

Brands by name

Popular brands