Arturia CZ V, User Manual

Page: 82 / 98

7.4.6. Multimode Filter
This analog filter model inserts one of 5 different kinds of filter into the FX chain. It can act
in low pass, high pass, band pass, and two comb filter modes. Each pass filter is available
in 12-, 24-, and 36 dB per octave slopes.
Parameter Description
Mode
Select from 5 options, including LP (Low Pass), HP (High Pass), BP (BandPass), Comb FB and
Comb FF
Slope
12-, 24-, or 36 dB per octave: sets how steep the rolloffs will be for the pass filters. (Not present
for Comb filters.)
Frequency Sets the frequency of the filter. Addressable in the Mod Matrix.
Resonance Emphasizes the cutoff frequency.
Wet/Dry
Amount
Controls the balance between the input signal and the effected signal.
Note: if you want to use
this as a pass filter in the FX chain, this effect that should be 100% Wet (fader all the way to
the top).
7.5. Overdrive
The Overdrive effect will add a certain "fuzziness" to the sound. The tone control will adjust
the brightness of the output. This is modeled after a "solid-state" circuit being distorted.
Control Description
Drive Sets the overdrive amount.
Tone Adjusts the high frequencies of the sound, smoothing it or adding a harsher edge.
Level Use this to compensate for increased output gain caused by the other settings.
Dry/Wet Controls the balance between the input signal and the effected signal.
77 Arturia - User Manual CZ V - FX (Effects)