Arturia CZ V User Manual Download Page 40

Page: 40 / 98

4.2.8. Pitch envelope

The pitch envelope modulates the frequency of the waveform over time. If there is no pitch

envelope (that is, if all the Pitch envelope points are at the bottom of the display, or if the

Envelope Depth parameter is set to zero) each key will play its normal pitch. If the Pitch

envelope goes positive for a time period, the frequency will go sharp; as the envelope level

falls, the pitch will return to its normal frequency.



♪

: To make the frequency go flat from the normal pitch when you strike a key, go to the ENVELOPES

tab, select a Pitch envelope, and set the Line's pitch envelope Depth to a negative number.

4.3. Detune, Modulation, and Noise Source

Between Line 1 and Line 2, in the center of the Synthesis screen, are controls that have to do

with the interaction between Lines, and other modulation and sound sources.

4.3.1. Detune (Oct, Note, and Fine)

The Detune controls are active only if both Lines are turned on: in 1+2’ or 1+1’ modes as set

by the LINE SELECT section on the upper right side of the on-screen keyboard. Changing

the pitch of one of the sound generators relative to the other can lead to quite dramatic

sound effects. The Detune parameters apply only to the right-side sound generator. Edit

these parameters by clicking and dragging up or down on the number you want to change:

• The OCT (Octave) parameter ranges from +3 to -3 octaves. For example, if OCT

is set to +1, when Line 1 is playing middle C the right generator (Line 1’ or 2’) will

play high C.

• The NOTE parameter changes the pitch of the right Line by semitones, 11 up or -11

down. For example, if NOTE is set to 7, when Line 1 is playing middle C the right

generator (Line 1’ or 2’) will play middle G.

• The FINE parameter changes the pitch of the oscillator in cents, or hundredths of

a semitone, in a range from +60 to -60. Detuning the right Line from the left a

few cents gives a natural depth to the sound, similar to a chorus effect.

Arturia - User Manual CZ V - SYNTHESIS SECTION / TAB

Summary of Contents for CZ V



































































































Search results

Summary of Contents for CZ V

Reviews:

Related manuals for CZ V

Brands by name

Popular brands

Arturia CZ V, User Manual

Search results

Summary of Contents for CZ V

Reviews:

Related manuals for CZ V

Brands by name

Popular brands