Artistic SD-16, User Manual

Page: 44 / 72

Page 44
Artistic Quilter SD-16 User Manual
Bobbin Winder Controls
All controls are shown in Figure 6.
Stop Button (Red)
The red button stops the bobbin winder once it has
started.
Start Button (Green)
The green button starts the bobbin winder. Press and
release the button to wind the bobbin. When the bobbin
is full the stop sensor will turn the machine off. If the stop
sensor is not correctly adjusted and has tripped before the
desired fill amount, pressing and holding the green button
down will continue to wind the bobbin until the button is
released.
Speed Selector
Rotate the speed selector knob to adjust the winding
speed. Winding speed can be adjusted while the bobbin is
winding.
Auto Fill LED Indicator
The LED is on when no bobbin or an empty or partially-full
bobbin is in the winder and it will flash while winding a
bobbin. When the stop sensor is tripped, the LED turns off
until the bobbin is removed from the winder.
Figure 6
Speed Selector
Auto Fill LED
Start (Green)
Stop (Red)
Stop Sensor
Using the Artistic Bobbin Winder
The Artistic Bobbin Winder is designed to wind bobbins
for your Artistic Quilter machine and will wind all M-class
bobbins. The bobbin winder includes a winding speed
control that allows winding bobbins at up to 3500 RPM.
1. Place the thread cone on the thread post to keep the
thread steady (Figure 7).
2. Place a bobbin on the bobbin post.
Tip: Make sure to push the bobbin all the way on the
post each time for consistent winding.
3. Thread the Artistic Quilter Bobbin Winder as shown in
Figure 8 by feeding the thread through the loop (1) at
the top of the thread mast and then into the thread
Figure 7