Artistic SD-16 User Manual Download

Page: 8 / 72

Page 8

Artistic Quilter SD-16 User Manual

Optional U.S. Grounding

for Customers with 120 VAC Connections

GROUNDED OUTLET BOXES

METAL

SCREW

ADAPTER

(B)

(C)

TAB FOR

GROUNDING

SCREW

(A)

GROUNDING PIN

This product is for use on a nominal 120 V or nominal 220 V circuit, and has a grounding plug that looks like

the plug illustrated in sketch A above. A temporary adapter, which looks like the adapter illustrated in sketches

B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded

outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be

installed by a qualified electrician. The green colored rigid ear, lug, and the like, extending from the adapter,

must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the

adapter is used, it must be held in place by the metal screw.

IMPORTANT:

In Canada, the use of a temporary adapter is not permitted by the Canadian Electric Code.

To repair or adjust the machine

If the machine breaks down or needs adjustment, first check the troubleshooting chart in the appendix to

inspect and adjust the machine yourself.

For more product information and updates, visit our website at www.artisticcreativeproducts.com.

The contents of this manual and product specifications are subject to change without prior notice.

• TruStitch Stitch Regulator

• Table Overlay (in table box)

• Lint brush

• Bobbins (4 pieces)

• Needle (134 R) size 16 (pack of 10)

• Needle (134 R) size 18 (pack of 10)

• Bobbin Case

• Thread stand and thread mast

• Pen Oiler

• Screwdriver (for bobbin case)

• Power Cord

• 2 mm hex tool

• 3 mm hex tool

• 8 mm wrench

• 3/32” hex tool

• Open-toe foot (Ruler foot installed)

• Bobbin Winder and accessories

• User manual

• Sample Thread Pack

Artistic Quilter SD-16 Accessories Included in the box:

Summary of Contents for SD-16









































































Search results

Summary of Contents for SD-16

Reviews:

Related manuals for SD-16

Brands by name

Popular brands

Artistic SD-16, User Manual

Search results

Summary of Contents for SD-16

Reviews:

Related manuals for SD-16

Brands by name

Popular brands