Step 12
BW24
Parts Needed For
Rear Entry Door All Sizes
7517 Lower Door Track (1)
7560 Ramp (1)
8530 Splice Channel (1)
7951 Support Column (1)
7958 Door Track (1)
INSIDE
INSIDE OF
BUILDING
Using the previous side entry door
steps and this illustration, you can
install the entry door at 2 locations
along the rear wall. Whichever you
choose, the door will always slide
towards the corner of the building.
1
Install lower door track and ramp
using 1/4" (6 mm) bolts and nuts.
2
Fasten splice channel, upside
down, to rear frame and to support
column using bolts and nuts, and
to wall panel using screws. Fasten
support column to rear frames using
bolts and nuts. Fold rear wall panel
slightly away from column to tighten
bolts and nuts.
3
Position door slides onto the legs,
from the end of door track, as shown
in the end view.
STEP
1
7517
7560
7948
Step 13
7958
7951
8530
STEP
4
STEP
2
4
Position door track to the inside
of the rear frame, butted up against
support column. With short fl ange of
track at bottom, fasten frame to track
using 4 screws at the 2nd, 3rd, 4th
and 5th hole in from support column.
END VIEW
OF TRACK
STEP
3
Door Location
Option I
Door Location
Option II
Door
Slide Direction
Notch
26
