Step 13
BW25
Parts Needed For
Side or Rear Entry Door All Sizes
7946 Door Jamb (2)
7948 Door Wall Brace (1)
7972 Door Handle Lock Bracket (1)
Direction of Sliding D
oor
#6Ax7/8" (22 mm) Screw
STEP
3
7948
STEP
2
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both door
jambs.
1
Place door wall brace behind wall
panel in the direction of sliding door.
Fasten panel to brace using screws.
2
Overlap rib of wall panel with a
door jamb and fasten at top to angle,
middle to brace, and bottom to frame
using #6Ax7/8" (22 mm) screws and
spacers. Position spacer inside wall
panel rib.
3
Fasten outer fl ange of door jamb
to wall panel using 3 screws.
4
Secure the door handle lock
bracket to the opposite door jamb at
the middle hole with a (no slot) bolt.
Remove and reinset
screws from panel
STEP
4
7972
#10-32x7/16" (11 mm)
(No Slot) Bolt
7946
7946
STEP
1
#8Ax5/16" (8 mm) Screw
Inside of Building
7/8" (22 mm) Screw
(top & bottom)
or
bolt
(at center)
Panel
Door
Jamb
Door
Track
Plastic spacer between
wall panel rib and track
Drill 1/4" (6 mm)
hole & bolt
Screw
7/8" (22 mm)
7/8" (22 mm)
#10-32 Square
Nut
27
