Each wall panel has a crimped rib on
1 side. The crimped rib should go
under the rib of the panel that follows
it. Leave out 1 main wall panel at the
side or rear entry door location.
1
Fasten the main wall panels at
the top and bottom with screws.
2
Fasten center of each panel to
the mid frames with screws. Fasten
overlapping ribs using 2 screws and
a bolt with nut at the center.
3
At the rear center of the building,
fasten the medium wall panel in the
same manner.
Step 11
BW23
Parts Needed For
Walls All Sizes
7822 Main Wall Panel (see below)
7823 Medium Wall Panel (1)
STEP
3
STEP
1
IF YOU ARE BUILDING A 12x24 (3,7 m x 7,3 m)
Install 3 additional main wall panels on each
side of the building.
IF YOU ARE BUILDING A 12x31 (3,7 m x 9,4 m)
Install 6 additional main wall panels on each
side of the building.
7823
#8Ax5/16" (8 mm) Screw
Crimped Rib
Underneath
At the truss columns, fasten rib with bolt,
washer & nut before screws are installed.
Detail Showing
Center of Panel Screwed
to Side Frame
Bolt and nut
does not go
thru side frame
at overlap
7822
#10-32 Square Nut
#10-32x7/16" (11 mm)
Screw
Washer
SCREWS TO FRAME
MEDIUM WALL PANEL
SCREW
TO RIB
BOLT TO
PANEL
SCREW
TO RIB
SCREWS TO FRAME
WIDE RIB
NARROW RIB
(HAS BEAD)
SCREWS TO
FRAME
STEP
2
25
