Parts Needed For
Trim 12x10 (3,7 m x 3,0 m)
Step 25
BW36
5220 Side Roof Trim (2)
6014 Side Roof Trim (2)
7846 Right Rake (2)
7845 Left Rack (2)
STEP
6
STEP
5
STEP
2
STEP
1
STEP
4
STEP
3
1
Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2
Position left and right rake to the
ends of roof, noting that rake slips
under ridge cap, but fi ts on top of side
roof trim. Fasten rake to the center
of roof panel rib using a bolt.
3
Fasten roof panel rib, rake, peak
cap and ridge cap together using bolts
and nuts. Fasten remaining peak cap
in the same manner.
4
Using your thumb and index fi nger,
overbend the bottom fl ange of the side
roof trim at the corner inward enough
so the right and left roof trim caps fi t
onto right and left corners.
5
Fasten rake to side trim using a screw
into roof panel.
6
Fasten the roof trim caps to the side
trim using a screw.
#10-32x7/16" (11 mm) Bolt
#10-32 Square Nut
Peak Cap
Right Rake
Left Rake
#8Ax5/16" (8 mm) Screw
Roof Trim Cap
7846
5220
Side Roof Trim
7845
6014
Tuck Flange In-
ward to Fit Inside
of Roof Trim Cap
38
