manualshive.com logo in svg

ARM MPS3, Technical Reference Manual, Page: 63 / 92

Share
Download
ARM MPS3 Technical Reference Manual Download Page 63

3.5 

Configuration files

This section describes the MPS3 board configuration files on the configuration microSD card that control
the board powerup and configuration process.

This section contains the following subsections:
•

3.5.1 Overview of configuration files and microSD card directory structure

 on page 3-63

.

•

3.5.2 config.txt generic board configuration file

 on page 3-64

.

•

3.5.3 Contents of the MB directory

 on page 3-64

.

•

3.5.4 Contents of the SOFTWARE directory

 on page 3-66

.

3.5.1 

Overview of configuration files and microSD card directory structure

The configuration microSD card on the MPS3 board contains configuration files that control the board
powerup and configuration process.

Because the board microSD card is non-volatile memory, it is only necessary to load new configuration
files if you change the system configuration. The microSD card that is supplied with the MPS3 board
contains default configuration files.

If you connect a workstation to the debug USB port, the microSD card appears as a 

USB Mass Storage

Device

 (USBMSD). You can then add, edit, or delete files.

You can use a standard text editor that produces DOS line endings to read and edit the board
configuration files.

The following figure shows a typical example of the directory structure on the microSD card memory.

config.txt

LOG.TXT

V2MMPS3(F:)

MB/

HBI0309B/

mbb_v???.ebf

AN???

an???_v?.bit
an???_v?.txt

SOFTWARE/

st_v???.axf

images.txt

board.txt

dm_v???.axf

Figure 3-3  Example USBMSD directory structure

 

Caution

 

File names and directory names are in 8.3 format:
• File names that you generate must be in lowercase.
• Directory names must be in uppercase.
• All configuration files must use DOS line endings (

0x0D

/

0x0A

).

The directory structure and file name format ensure that each image is matched to the correct target
device defined in the board configuration EEPROM:

config.txt

 file

Generic configuration file for all boards. This file applies to all Arm Versatile
Express motherboards as well as the MPS3 board. Some settings are specific to the
MPS3 board.

3 Configuration

3.5 Configuration files

100765_0000_04_en

Copyright © 2017–2020 Arm Limited or its affiliates. All rights

reserved.

3-63

Non-Confidential

Summary of Contents for MPS3





























































































Reviews:

No comments