ARM Cortex A9 Technical Reference Manual Download Page 76

Page: 76 / 213

System Control

ARM DDI 0388I

4-27

ID073015

Non-Confidential

Attempts to read or write the SCTLR from secure or Non-secure User modes result in an
Undefined Instruction exception.

Attempts to write to this register in secure privileged mode when

CP15SDISABLE

is HIGH

result in an Undefined Instruction exception.

Attempts to write secure modify only bits in non-secure privileged modes are ignored.

Attempts to read secure modify only bits return the secure bit value.

Attempts to modify RO bits are ignored.

To access the SCTRL, read or write the CP15 register with:

MRC p15, 0,<Rd>, c1, c0, 0; Read SCTLR
MCR p15, 0,<Rd>, c1, c0, 0; Write SCTLR

4.3.10

Auxiliary Control Register

The ACTLR characteristics are:

Purpose

Controls:
•

parity checking, if implemented

•

allocation in one way

•

exclusive caching with the L2 cache

•

coherency mode,

Symmetric Multiprocessing

(SMP) or

Asymmetric

Multiprocessing

(AMP)

•

speculative accesses on AXI

•

broadcast of cache, branch predictor, and TLB maintenance
operations

•

write full line of zeros mode optimization for L2C-310 cache
requests.

Usage constraints

The ACTLR is:
•

Only accessible in privileged modes.

•

Common to the Secure and Non-secure states.

•

RW in Secure state.

•

RO in Non-secure state if NSACR.NS_SMP = 0.

[2]

C bit

Banked

Determines if data can be cached at any available cache level:

Data caching disabled at all levels. This is the reset value.

Data caching enabled.

[1]

A bit

Banked

Enables strict alignment of data to detect alignment faults in data accesses:

Strict alignment fault checking disabled. This is the reset value.

Strict alignment fault checking enabled.

[0]

M bit

Banked

Enables the MMU:

MMU disabled. This is the reset value.

MMU enabled.

Table 4-35 SCTLR bit assignments (continued)

Bits

Name

Access

Function

Summary of Contents for Cortex A9





















































































































































































































Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands

ARM Cortex A9, Technical Reference Manual

Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands