ARM Cortex A9 Technical Reference Manual Download Page 206

Page: 206 / 213

Revisions

ARM DDI 0388I

C-2

ID073015

Non-Confidential

Made PMSWINC descriptions consistent.

•

Table 4-29 on page 4-46

•

Software Increment Register on page 4-100.

Updated MIDR bits [3:0] from 0 to 1.

Table 4-1 on page 4-5.

Corrected ID_MMFR3 [23:20] bit value to

0x1

Table 4-42 on page 4-50.

Corrected AFE bit description. Table 4-51

page 4-62.

Corrected Auxiliary Control Register bit field.

•

Table 4-52 on page 4-66

•

Figure 4-36 on page 4-66.

Corrected S parameter values.

Set/Way format on page 4-83.

Made descriptions of bits [11], [10], and [8] consistent with
table.

Figure 4-41 on page 4-87.

Corrected description of event

0x68

, architecturally

removed.

Table 4-80 on page 4-123.

Corrected TLB lockdown entries number from 8 to 4.

c10, TLB Lockdown Register on page 4-134.

Corrected A, I, and F bit descriptions.

c12, Interrupt Status Register on page 4-147.

Changed number of micro TLB entries from 8 to 32.

Micro TLB

on page 6-4

Removed repeated information about cache types.

Micro TLB

on page 6-4

Amended IRGN bits description from TTBCR to
TTBR0/TTRBR1.

Main TLB

on page 6-4

Added note about invalidating the caches and BTAC
before use.

About the L1 memory system

on page 7-2

Added parity support scheme information section.

Parity error support

on page 7-12

Listed and described L2 master interfaces, M0 and M1.

Cortex-A9 L2 interface

on page 8-2

Added cross reference to DBSCR external description.
Extended footnote to include reference to the DBSCR
external view.

Table 10-1 on page 10-5

Corrected DBGDSCR description with the addition of
internal and external view descriptions.

CP14 c1, Debug Status and Control Register (DBGDSCR) on page 8-9.

Re-ordered and extended MOE bits descriptions. Table 8-2

page 8-10.

Added more cross-references from Table 10-1.

•

CP14 c1, Debug Status and Control Register (DBGDSCR) on
page 8-9

•

Device Power-down and Reset Status Register (DBGPRSR) on
page 8-27

•

Integration Mode Control Register (DBGITCTRL) on page 8-45

•

Claim Tag Clear Register (DBGCLAIMCLR) on page 8-47

•

Lock Access Register (DBGLAR) on page 8-48

•

Lock Status Register (DBGLSR) on page 8-49

•

Authentication Status Register (DBGAUTHSTATUS) on
page 8-49

•

Device Type Register (DBGDEVTYPE) on page 8-50.

Corrected Table 10-1 footnotes.

Table 10-1 on page 10-5

Table C-2 Differences between issue A and issue B (continued)

Change

Location

Summary of Contents for Cortex A9





















































































































































































































Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands

ARM Cortex A9, Technical Reference Manual

Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands