ARM Cortex A9 Technical Reference Manual Download Page 137

Page: 137 / 213

Preload Engine

ARM DDI 0388I

9-4

ID073015

Non-Confidential

9.3

PLE operations

The following sections describe the PLE operations:
•

Preload Engine FIFO flush operation

•

Preload Engine pause channel operation

•

Preload Engine resume channel operation

•

Preload Engine kill channel operation

on page 9-5

•

PLE Program New Channel operation

on page 9-5

For all Preload Engine operations:

•

NSACR.PLE controls Non-secure execution.

•

PLEUAR.EN controls User execution.

•

the operations are only available in configurations where the Preload Engine is present,
otherwise an Undefined Instruction exception is taken.

9.3.1

Preload Engine FIFO flush operation

The PLEFF operation characteristics are:

Purpose

Flushes all PLE channels programmed previously including the PLE
channel being executed.

To perform the PLE FIFO Flush operation, use:

MCR p15, 0, <Rt>, c11, c2, 1

<Rt> is not taken into account in this operation.

9.3.2

Preload Engine pause channel operation

The PLEPC operation characteristics are:

Purpose

Pauses PLE activity.

You can perform a PLEPC operation even if no PLE channel is active. In this case, even if a
new PLE channel is programmed afterwards, its execution does not start until after a PLE
Resume Channel operation.

To perform the PLE PC operation, use:

MCR p15, 0, <Rt>, c11, c3, 0

<Rt> is not taken into account in this operation.

9.3.3

Preload Engine resume channel operation

The PLERC operation characteristics are:

Purpose

Causes Preload Engine activity to resume.

If you perform a PLERC operation when the PLE is not paused, the Resume Channel operation
is ignored.

To perform a PLERC operation, use:

MCR p15, 0, <Rt>, c11, c3, 1

Summary of Contents for Cortex A9





















































































































































































































Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands

ARM Cortex A9, Technical Reference Manual

Search results

Summary of Contents for Cortex A9

Reviews:

Related manuals for Cortex A9

Brands by name

Popular brands