Scale
30
001
.2
506
0.E
N
r
e
v.
1
1
Patient Scale Information
Fig. 57
1
2
3
5
4
Scale
Key to Scale (Fig. 57)
1) Scale display on handset
2) Operating buttons on handset
3) Jib
4) Spreader bar
5) Load cell cover
If your MAXI MOVE has been equipped with an
ArjoHuntleigh scale, your lift will have the added
advantage of being able to weigh patients once
they have been lifted.
Descriptive Marking/Seals C.E.
Units only
After inspection, the following marks will be found
on the scale label (see Fig. 58):
•
CE mark (signifying compliance with Council
Directive 93/42/EEC for medical devices and
Council Directive 90/384/EEC for non-
automatic weighing instruments, followed by
the two digits of the year in which it was
affixed).
•
The identification number of the notified body
that has carried out the EC surveillance.
•
A green sticker bearing a capital letter ‘M’ in
black (signifying that the scale is suitable for an
approved application in accordance with
Council Directive 90/384/EEC).
•
The number of the EC type approval
certificate.
•
The accuracy class.
•
The maximum capacity.
•
The minimum capacity
•
Verification scale interval.
•
Calibration counter
•
Gravity configuration counter
•
A seal bearing the identification and number of
the inspection body.
Fig. 58
Reinspection
Reinspection of approved weigh scales must be
carried out in accordance with the rules stipulated
by local authorities (as specified by each country).
If the seals are broken such as during repair or
replacement of the load cell, then the entire floor
lift must be disqualified and not used again until a
reinspection has been carried out by a certified
inspection body.
WARNING: The scale has been designed to
weigh hospital or care facility patients under the
supervision of trained nursing staff. Avoid any
other uses to avoid injuries.
Scale
marking
