Arjohuntleigh MAXI MOVE Instructions For Use Manual Download

Page: 42 / 53

Technical Specifications

001

506

0.E

PRODUCT INFORMATION

MAXI MOVE

Total weight (standard jib)

63.5 kg (140 lb)

Lifting capacity (SWL)

Regular jib: 227 kg (500 lb)

Extended jib: 130 kg (287 lb)

Battery pack weight

5.0 kg (11 lb)

Turning Diameter

1222 mm (48 in)

Minimum door requirement

717 mm (28.25 in) for Standard Base (KMCS

) & Low Height Base (KMCL

)

770 mm (30 3/8) in) for Extra Low Height Base (KMCE

)

Operating forces of controls

2.5- 3N

ELECTRICAL

Degree of protection

IPx7 - Hand control

IP24 - MAXI MOVE

Internally powered

24 Vdc

Battery Type

Rechargeable (Sealed Lead Acid)

Battery Capacity

24 Vdc, 4.0 Ah to 5.5 Ah

Battery charger input

(part #NDA8200)

100 to 240 Vac / 50 to 60 Hz

Up and down current limiting

12 ± 1 Amp.

Duty cycle

15% - max. 2 min. continuous use

Sound power level up

61.9 dBA

Sound power level down

61.7 dBA

Medical equipment

Type BF protection against electrical shock in accordance with IEC 60601-1

ArjoHuntleigh products meet the requirements of Electromagnetic Compatibility

(EMC) as stated in clause 12.5 of the Medical Devices Directive 93/42/EEC.

The MAXI MOVE conforms to UL 60601-1, CSA C22.2 No. 60601.1 - M90 and ISO 10535:2006 (except when

being used in conjunction with a stretcher; see “Using your MAXI MOVE” section on page 25).

WARNING: Wireless communication equipment such as wireless home network devices, mobile phones, cordless

telephones, and their base stations, walkie-talkies, etc., can affect the MAXI MOVE and should be kept at least

2.34 km away from it. Cables from potentially strong sources of electromagnetic fields should not be placed near

the unit. See “Electromagnetic Compatibility” section for more details.

DIGITAL SCALE SPECIFICATIONS

Weight range

227 kg (500 lb)

Display resolution and type

0.1 kg (0.2 lb), liquid crystal display

Accuracy (in service)

2-50 kg ±100 g4-100 lb ±0.2 lb

Class III

50-200 kg ±200 g100-400 lb ±0.4 lb

200-227 kg ±300 g400-500 lb ±0.6 lb

OPERATION AND STORAGE CONDITIONS

Ambient temperature range

Operation: 5° to 40°C (+41° to +104°F) Storage: - 25° to 70°C (-13° to 158°F)

Relative humidity range

Operation: 15 to 93% (non condensing)

Storage: Up to 93%, (non condensing)

Atmospheric pressure range

Operation: 700 hPa to 1060 hPa (2000 m max) Storage: 500 hPa to 1060 hPa

WARNING: The equipment is not suitable in the presence of flammable

anesthetic mixture with air or oxygen, or with nitrous oxide. Using the MAXI MOVE in this environment might lead

to an explosion. The lift might create some spark internally and ignite the gaz.

RECYCLING

Battery

Sealed lead-acid, rechargeable, recycleable

Package

Cardboard recycleable

The Lift

Separated and recycled, according to the European Directive 2002/96/EG
(WEEE).

Technical Specifications

Summary of Contents for MAXI MOVE






















































Search results

Summary of Contents for MAXI MOVE

Reviews:

Related manuals for MAXI MOVE

Brands by name

Popular brands

Arjohuntleigh MAXI MOVE, Instructions For Use Manual

Search results

Summary of Contents for MAXI MOVE

Reviews:

Related manuals for MAXI MOVE

Brands by name

Popular brands