Using your MAXI MOVE
23
001
.25
06
0.E
N
re
v.
1
1
Fig. 36
To stop any powered movement, release the
control button or press the stop button.
The spreader bar will remain firmly in position,
once powered movement has stopped.
Always ensure the spreader bar is securely
connected to the jib before starting to lift.
Care of Your Powered DPS Spreader Bar
For general care, refer to the section entitled
“Care of your MAXI MOVE”. Refer in particular to
the paragraphs on cleaning plastic parts, labels,
etc.
Using the Loop Spreader Bar
If your MAXI MOVE has a loop spreader bar,
ensure that the spreader bar is rotated into
position before attaching the sling, so the
eventual lift will resemble Fig. 37.
When attaching a loop sling to the loop spreader
bar, always ensure that the sling attachment
loops are installed correctly into the retaining
hooks (see Fig. 38).
Fig. 37
Fig. 38
Use ArjoHuntleigh loop slings with the loop
spreader bar (consult Fig. 4). They are available
in four color-coded sizes (small, medium, large
and extra-large). For details on a more
specialized range of slings, please contact
ArjoHuntleigh or its authorized distributors.
The loop slings are available with or without a
head support. A mesh sling is also available in all
four sizes, with or without a head support.
CAUTION: Before and during operation of the
powered DPS spreader bar, ensure all
obstructions are clear of the spreader bar,
support frame and jib.
CAUTION: The DPS actuator contains moving
parts. Take care not to damage it. Should the
covers become damaged, do not use the lift and
replace the actuator before reusing the lift.
Handset
display
DPS
“Recline”
button
Jib
“Down”
button
Chassis
“Leg Closed”
button
Jib “Up”
button
DPS
“Sit Up”
button
Chassis
“Legs Open”
button
Retaining hook
Sling attachment loop
Two-point spreader
bar
