Arista vEOS, Configuration Manual, Page: 36 / 128

Example:
The following example removes the secret access key from the vEOS running-config.
veos(config-cloud-aws)#no secret access-key 0 565656 test
veos(config-cloud-aws)#
Example:
The following example returns the vEOS to Global configuration mode.
veos(config-cloud-aws)#secret access-key 0 565656 test
veos(config-cloud-aws)#exit
veos(config)#
show cloud high-availability (vEOS)
The show cloud high-availability command displays the high availability configured settings.
Command Mode
EXEC
Command Syntax
show cloud high-availability
Example
This command displays details and status of the cloud high-availability configuration.
veos#show cloud high-availability
Cloud HA Configuration:
Peer address
: 10.2.201.149
Source interface : Ethernet1
Enabled : True
Failover recovery time : 5
Status : valid
State : ready
Last failover time : never
Last recovery time : never
Last config validation start time : 0:26:08 ago
Last config validation end time : 0:26:06 ago
Failovers
: 0
show cloud high-availability routes
The show cloud high-availability routes command displays the configured local or peer route table, destination
IP address and local Next Hop Interface.
Command Mode
EXEC
Command Syntax
show cloud high-availability routes
Example:
The example below displays high availability routes information.
veos(config)#show cloud high-availability routes
Peer Route Type Route ID Destination Next Hop Interface
----------- ----------- -------------- ---------- ------------
veos6 primary rtb-1dc75679 0.0.0.0/0 eni-e61d95e7
vEOS Router Configuration Guide 36