manualshive.com logo in svg

Arista vEOS, Configuration Manual, Page: 100 / 128

Share
Download
Arista vEOS Configuration Manual Download Page 100

veos(config-if-Tu1)#vrf forwarding blue 
veos(config-if-Tu1)#ip address 1.0.4.1/24  
veos(config-if-Tu1)#tunnel mode gre 
veos(config-if-Tu1)#mtu 1394
veos(config-if-Tu1)#tunnel source 1.0.0.1
veos(config-if-Tu1)#tunnel destination 1.0.0.2
veos(config-if-Tu1)#tunnel ipsec profile vrouter 

10. Enable the IPsec flow parallelization feature to achieve high throughput over the IPsec tunnel. To enable the

feature, include the flow parallelization encapsulation udp command in the IPsec profile configuration. Then,
apply the IPsec profile configuration to the tunnel interface.
Example: (IPsec profile configuration)

veos(config-ipsec)#profile vrouter
veos(config-ipsec-profile)#ike-policy ike-vrouter
veos(config-ipsec-profile)#sa-policy sa-vrouter
veos(config-ipsec-profile)#dpd 10 50 clear
veos(config-ipsec-profile)#connection start
veos(config-ipsec-profile)#mode transport
veos(config-ipsec-profile)#flow parallelization encapsulation udp

Example: (Applying IPsec profile to tunnel interface)

veos(config)#interface tunnel0
veos(config-if-Tu0)#tunnel ipsec profile vrouter

Note:  Repeat step 9 on the other end of the tunnel. The IPsec flow parallelization feature must be
enabled on both end of the tunnel.

Examples of Running-configurations for GRE-over-IPsec Tunnels

The following examples show the running configurations for two vEOS Router instances (vEOS1 and vEOS2).
The instances are the tunnel endpoints of a GRE-over-IPsec tunnel.

Running Configuration for vEOS1

ip security
ike policy ikebranch1
integrity sha256
dh-group 15
!
sa policy sabranch1 
sa lifetime 2
pfs dh-group 14
!
profile hq
mode tunnel
ike-policy ikebranch1
sa-policy sabranch1
connection add
shared-key keyAristaHq 
dpd 10 50 clear
!
interface Tunnel1 
mtu 1404
ip address 1.0.3.1/24
tunnel mode gre
tunnel source 1.0.0.1

vEOS Router Configuration Guide

100

Summary of Contents for vEOS

































































































































Reviews:

No comments