manualshive.com logo in svg

Arista vEOS, Configuration Manual, Page: 27 / 128

Share
Download
Arista vEOS Configuration Manual Download Page 27

The following example returns the vEOS to the cloud-ha configuration mode.

veos(config-cloud-ha-peer-veos2-azure)#exit
veos(config-cloud-ha-peer-veos2)#

backup-gateway (vEOS - Azure)

The cloud high-availability command in the cloud-ha submode assigns the backup gateway parameters for the
Azure high availability peered cloud. The no backup-gateway command removes the configuration from the
vEOS running-config. The exit command returns the vEOS to global configuration mode.

Command Mode

Cloud HA azure configuration submode

Command Syntax

backup-gateway [Azure Rt_Info]resource-group[Name]

no backup-gateway [Azure Rt_Info]

Parameters

• Azure Rt_Info

• azure-rt-name The azure route name.

• dest-ip-address/mask The destination IP address.

• local-ip-address The local IP address.

• resource-group

• Name Azure resource group name.

Example:

The following example configures the parameters for the Azure high availability peered cloud.

veos(config)#cloud high-availability
veos(config-cloud-ha)#peer veos2
veos(config-cloud-ha-peer-veos2)#azure
veos(config-cloud-ha-peer-veos2-azure)#backup-gateway Rt1 10.10.1.1/10 
1.1.1.1 resource-group test

Example:

The following example removes the backup-gateway parameters for the Azure high availability peered cloud.

veos(config-cloud-ha-peer-veos2-azure)#no backup-gateway Rt1 10.10.1.1/10 
veos(config-cloud-ha-peer-veos2-azure)#

bfd source-interface (vEOS)

The bfd source-interface command in the cloud-ha configuration submode configures BFD source interface
parameters for the high availability peer. The no bfd source-interface command removed the BFD configurations
from the vEOS running-config.

Command Mode

Global Cloud HA peer configuration mode

Command Syntax

#bfd source-interface [Interface_Type]single-hop

#no bfd source-interface

27

Cloud High Availability

Summary of Contents for vEOS

































































































































Reviews:

No comments